Boot Failure After Update

Legacy Netrunner 17
1

I installed 17 on my system and once logged into the installed system I tried to install the fglrx-updates package and then apply all updates from apt-get. There was 400 + meg since the base install is around 4 months old. When I reboot the boot splash appears and then disappears after what I would call a typical boot period and goes to a black screen and stays there. I tried to reinstall again and install the proprietary driver and run the update from Muon. I noticed this time that it asked if I wanted to keep an old or use a new version of Xsession. I am sorry I did make great notes on this. This time though I opted to say keep the old thinking the update may have caused X corruption since the system appeared to freeze at the point that X would be loading. Note at this point I could not even get to TTY1 in either of my installs. This second time with the old Xsession loaded a very corrupted Xsession with a lot of collored lines but nothing you could make out or navigate from. I reinstalled again and loaded the proprietary driver and left well enough alone except I would think I should be able to run updates for security reasons. Netrunner is Kubuntu based and I have installed version 15.10 and installed AMD driver and updated and never had an issue. Any ideas?

Bob

2

I have a similar problem, according to updates from Netrunner goes with me after the restart nothing, I see just the plasma login screen and suddenly jump to this and I have only lines on the screen.

Netrunner reinstalled, made update and exactly the same problem, only lines on the screen. And I use the free driver.

I would say that Netrunner has extremely zerschossen the update. It helps not to reinstall the update after you have the problem again, only strip when the computer is restarted.

3

I seem to be having a similar issue as the OP. I have experienced the black screen with just a pointer on it on both virtual and metal installations. I have also tried re-installation on both with the same result. I also tried keeping the old Xsession on each with no difference.
I did see a thread with similar symptoms, but it appears to be related to sddm’s issues with encrypted home directories and I didn’t encrypt on my virtual installations.
Any help would be appreciated, I really like what I have seen of the distro, and am hoping to make it my primary distro, but this issue is making it difficult.

4

Thank you for the replies people. I am currently running Netrunner 17 without any updates and with the fglrx base driver installed. It appears to be running fine at this time. I am pretty certain if I run Muon Update, it would be at the black screen again. I have an awesome video card, why not take full advantage of it. I like the idea of open source software and drivers but if they can’t take full advantage of the hardware I spent good money on, I will take advantage of the proprietary drivers. I started with computers for the awesome gaming experience so I want the full abilities of my hardware. That being said. Netrunner appears to have some regression with the base Kubuntu. I can install Kubuntu 15.10 and install fglrx drivers from the additional drivers utility. Then install all the available updates from Muon and have a boot-able system. I cannot get the same outcome with the install of Netrunner 17 and following the same logical post install path. Ideas

5

the problem is that I have installed Netrunner again, have performed an update, only the latest Linux kernel have 4.5 installed, then the latest Mesa driver.

started computer and now I land in console mode and must always enter startx, so that the desktop starts.

The problem of Netrunner is SDDM … the worst problems! And if you google, you will find extremely many problems with SDDM. Extremely many users can not log in after updating to 5.5.3 Plasma, but will have to type startx.

Unfortunately Netrunner has not paid attention to something. I do wonder how it will look like with the quality of Netrunner, the looks are not everything.

So Netrunner … where are the solutions?

Because Netrunner I have about 6 hours of my life consumed by your botch to get down again. :@

6

I have found the error!

It is clearly to sddm 0:13 and this caused the biggest problems. That’s right here in this forum already aware of this problem (http://forums.netrunner-os.com/showthread.php?tid=23151&pid=36445) and yet it is offered via an update and a new user does not know that and spends hours long error searches.

And to you even get an answer here is probably Christmas!

So, have the login problems, proceed as follows:

Install old sddm Version:

sudo apt-get install sddm = 0.11.0-0ubuntu11

and then under:

/etc/apt/preferences.d/sddm.conf file

Package: sddm
Pin: version 0.11.0-0ubuntu11
Pin-Priority: 1001

change …

but not surprised you, if this is not there sddm.config, I am surprised at some Netrunner so no longer.

it should not be there, You must you 24 hours around the clock are pleased that a new update is available, nähmlich that unstable, catastrophic SSDM 0.13. This please do not install, but as long as do not install until a correct, working version is available!

That should have known Netrunner, is well known since January and still cheer you this broken part via update below. Irresponsible something!

7

and even a hint, only changes nothing in sddm, otherwise after starting the computer, the screen white and her whatâ press anything else. Netrunner is afflicted absolutely immature and extremely many errors, therefore usually hands off of it and prefer yum original Ubuntu!

8

Thanks for reporting we will take a look into that problem.
The update was pushed by kubuntu backports ppa so not by us directly.

9

it is quite clear to sddm 0.13 and if you google for sddm 0.13, you can find hundreds of pages of that there are problems with it since August.

Since August is promised that you want to fix the error to the release 0.14, but now we have almost April and it has done nothing.

The problem is, if the old version retains 0.13 and e.g want you can log in without password, it can happen that the computer again does not go to desktop mode and the screen simply remains white.

KDE 5.5.3 is fraught with extremely many errors. Something may be published in any way as Final.

A new customer like me who does not know that and Netrunner or Kubuntu installed is so driven to madness. For 12 hours I’m around with your Netrunner and I Eaves my hair, because there are only problems.

Something may not be easy if you want to use an OS productive and with such an error may sowas called Final, especially when since August you know sddm caused 0.13 big mistakes.

10

[quote]it is quite clear to sddm 0.13 and if you google for sddm 0.13, you can find hundreds of pages of that there are problems with it since August.
[/quote]
The ssdm update was pushed in january and did not produce any problems in our tests.
We are still not able to reproduce the issue you describe.

Can you provide a sddm.log from /var/log/ (with the version that does not work for you).
Also can you provide the loginctl show-session info like described here: http://forums.netrunner.com/showthread.php?tid=23470&pid=37177#pid37177
if you are able to somehow login with sddm 0.13.

11

but exact sddm 0.13 causes immense problems and if you google after that teem in the forums only way of errors and problems with the sddm 0.13 and with sddm 0.14 to allegedly provide a fix, but that was promised by the KDE team in August and soon we of April.
I installed sddm 0:13 and already the problems begin, I land at boot back into the console and must "startx, so that the desktop loads at all.
Here is my log:

[08:29:55.045] (II) DAEMON: Initializing... [08:29:55.057] (II) DAEMON: Starting... [08:29:55.057] (II) DAEMON: Adding new display 0 on vt 7 ... [08:29:55.059] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [08:29:55.067] (II) DAEMON: Display server starting... [08:29:55.067] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [08:29:55.670] (WW) DAEMON: Signal received: SIGUSR1 [08:29:55.670] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup" [08:29:55.671] (II) DAEMON: Display server started. [08:29:55.671] (II) DAEMON: Socket server starting... [08:29:55.671] (II) DAEMON: Socket server started. [08:29:55.673] (II) DAEMON: Greeter starting... [08:29:55.696] (II) HELPER: [PAM] Starting... [08:29:55.696] (II) HELPER: [PAM] Authenticating... [08:29:55.696] (II) HELPER: [PAM] returning. [08:29:55.767] (II) DAEMON: Greeter session started successfully [08:29:56.139] (II) GREETER: Connected to the daemon. [08:29:56.139] (II) DAEMON: Message received from greeter: Connect [08:29:56.295] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.296] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.296] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.297] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.299] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.300] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.301] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.301] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.301] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.307] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.309] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.310] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.311] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.313] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.314] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.314] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:56.315] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [08:29:58.572] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd5abf2a90), parent's thread is QThread(0x10bd0b0), current thread is QThread(0x12739d0) [08:29:58.572] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [08:29:59.626] (WW) GREETER: file:///usr/share/sddm/themes/breeze/components/InfoPane.qml:52:22: Unable to assign [undefined] to int [08:29:59.628] (WW) GREETER: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.19' [08:29:59.631] (II) GREETER: Message received from daemon: Capabilities [08:29:59.631] (II) GREETER: Message received from daemon: HostName [08:30:47.465] (II) DAEMON: Message received from greeter: Login [08:30:47.465] (II) DAEMON: Reading from "plasma.desktop" [08:30:47.480] (II) HELPER: [PAM] Starting... [08:30:47.480] (II) HELPER: [PAM] Authenticating... [08:30:47.481] (II) HELPER: [PAM] Preparing to converse... [08:30:47.481] (II) HELPER: [PAM] Conversation with 1 messages [08:30:49.229] (II) HELPER: [PAM] returning. [08:30:49.230] (II) DAEMON: Authenticated successfully [08:30:49.230] (II) GREETER: Message received from daemon: LoginSucceeded [08:30:49.291] (II) HELPER: [PAM] Ended. [08:30:49.293] (II) DAEMON: Auth: sddm-helper exited successfully [08:30:49.293] (II) DAEMON: Greeter stopped. [08:30:49.316] (II) HELPER: Starting: "/usr/share/sddm/scripts/Xsession" "/usr/bin/startkde" [08:30:49.318] (II) HELPER: Adding cookie to "/home/gerhard/.Xauthority" [08:30:49.325] (II) DAEMON: Session started [08:41:02.735] (WW) DAEMON: Authentication error: "Process crashed" [08:41:02.736] (WW) DAEMON: Auth: sddm-helper crashed (exit code 0) [08:41:02.736] (WW) DAEMON: Authentication error: "Process crashed" [08:41:02.736] (II) DAEMON: Auth: sddm-helper exited successfully [08:41:02.736] (II) DAEMON: Socket server stopping... [08:41:02.736] (II) DAEMON: Socket server stopped. [08:41:02.736] (II) DAEMON: Display server stopping... [08:41:03.166] (II) DAEMON: Display server stopped. [08:41:03.166] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [08:41:03.170] (II) DAEMON: Removing display 0 ... [08:41:03.170] (II) DAEMON: Adding new display 0 on vt 7 ... [08:41:03.170] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [08:41:03.175] (II) DAEMON: Display server starting... [08:41:03.175] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [08:41:03.177] (WW) DAEMON: Signal received: SIGTERM [08:41:03.178] (II) DAEMON: Display server stopping... [08:41:03.179] (II) DAEMON: Display server stopped. [08:41:03.179] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [08:41:24.595] (II) DAEMON: Initializing... [08:41:24.608] (II) DAEMON: Starting... [08:41:24.608] (II) DAEMON: Adding new display 0 on vt 7 ... [08:41:24.610] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [08:41:24.617] (II) DAEMON: Display server starting... [08:41:24.617] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [08:41:25.112] (WW) DAEMON: Signal received: SIGUSR1 [08:41:25.112] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup" [08:41:25.113] (II) DAEMON: Display server started. [08:41:25.113] (II) DAEMON: Socket server starting... [08:41:25.113] (II) DAEMON: Socket server started. [08:41:25.114] (II) DAEMON: Greeter starting... [08:41:25.128] (II) HELPER: [PAM] Starting... [08:41:25.128] (II) HELPER: [PAM] Authenticating... [08:41:25.128] (II) HELPER: [PAM] returning. [08:41:25.221] (II) DAEMON: Greeter session started successfully [08:41:25.573] (II) GREETER: Connected to the daemon. [08:41:25.574] (II) DAEMON: Message received from greeter: Connect [08:41:25.715] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.716] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.716] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.716] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.718] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.718] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.718] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.718] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.719] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.719] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.721] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.722] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.722] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.724] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.724] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.724] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:25.724] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [08:41:26.453] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffdceaa5a70), parent's thread is QThread(0x10b40b0), current thread is QThread(0x11035c0) [08:41:26.454] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [08:41:27.464] (WW) GREETER: file:///usr/share/sddm/themes/breeze/components/InfoPane.qml:52:22: Unable to assign [undefined] to int [08:41:27.466] (WW) GREETER: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.19' [08:41:27.469] (II) GREETER: Message received from daemon: Capabilities [08:41:27.469] (II) GREETER: Message received from daemon: HostName [08:41:35.355] (II) DAEMON: Message received from greeter: Login [08:41:35.356] (II) DAEMON: Reading from "plasma.desktop" [08:41:35.374] (II) HELPER: [PAM] Starting... [08:41:35.374] (II) HELPER: [PAM] Authenticating... [08:41:35.374] (II) HELPER: [PAM] Preparing to converse... [08:41:35.374] (II) HELPER: [PAM] Conversation with 1 messages [08:41:35.984] (II) HELPER: [PAM] returning. [08:41:35.985] (II) DAEMON: Authenticated successfully [08:41:35.985] (II) GREETER: Message received from daemon: LoginSucceeded [08:41:36.047] (II) HELPER: [PAM] Ended. [08:41:36.050] (II) DAEMON: Auth: sddm-helper exited successfully [08:41:36.050] (II) DAEMON: Greeter stopped. [08:41:36.086] (II) HELPER: Starting: "/usr/share/sddm/scripts/Xsession" "/usr/bin/startkde" [08:41:36.089] (II) HELPER: Adding cookie to "/home/gerhard/.Xauthority" [08:41:36.097] (II) DAEMON: Session started [09:18:47.024] (WW) DAEMON: Signal received: SIGTERM [09:18:47.025] (II) DAEMON: Socket server stopping... [09:18:47.025] (II) DAEMON: Socket server stopped. [09:18:47.025] (II) DAEMON: Display server stopping... [09:18:47.336] (II) DAEMON: Display server stopped. [09:18:47.336] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [09:18:47.340] (WW) DAEMON: QProcess: Destroyed while process ("/usr/lib/x86_64-linux-gnu/sddm/sddm-helper") is still running. [09:19:15.012] (II) DAEMON: Initializing... [09:19:15.025] (II) DAEMON: Starting... [09:19:15.025] (II) DAEMON: Adding new display 0 on vt 7 ... [09:19:15.027] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [09:19:15.036] (II) DAEMON: Display server starting... [09:19:15.036] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [09:19:15.603] (WW) DAEMON: Signal received: SIGUSR1 [09:19:15.603] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup" [09:19:15.604] (II) DAEMON: Display server started. [09:19:15.604] (II) DAEMON: Socket server starting... [09:19:15.605] (II) DAEMON: Socket server started. [09:19:15.606] (II) DAEMON: Greeter starting... [09:19:15.630] (II) HELPER: [PAM] Starting... [09:19:15.630] (II) HELPER: [PAM] Authenticating... [09:19:15.630] (II) HELPER: [PAM] returning. [09:19:15.718] (II) DAEMON: Greeter session started successfully [09:19:15.936] (II) GREETER: Connected to the daemon. [09:19:15.936] (II) DAEMON: Message received from greeter: Connect [09:19:16.092] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffcd299eb10), parent's thread is QThread(0x205de30), current thread is QThread(0x20afb90) [09:19:16.093] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffcd299eb10), parent's thread is QThread(0x205de30), current thread is QThread(0x20afb90) [09:19:16.102] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffcd299eb10), parent's thread is QThread(0x205de30), current thread is QThread(0x20afb90) [09:19:16.102] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [09:19:16.883] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffcd299eb10), parent's thread is QThread(0x205de30), current thread is QThread(0x20afb90) [09:19:16.883] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [09:19:18.022] (WW) GREETER: file:///usr/share/sddm/themes/breeze/components/InfoPane.qml:52:22: Unable to assign [undefined] to int [09:19:18.040] (WW) GREETER: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18' [09:19:18.043] (II) GREETER: Message received from daemon: Capabilities [09:19:18.043] (II) GREETER: Message received from daemon: HostName [09:19:37.245] (II) GREETER: Time engine Clock skew signaled [09:19:58.982] (II) DAEMON: Message received from greeter: Login [09:19:58.983] (II) DAEMON: Reading from "plasma.desktop" [09:19:59.000] (II) HELPER: [PAM] Starting... [09:19:59.000] (II) HELPER: [PAM] Authenticating... [09:19:59.001] (II) HELPER: [PAM] Preparing to converse... [09:19:59.001] (II) HELPER: [PAM] Conversation with 1 messages [09:19:59.611] (II) HELPER: [PAM] returning. [09:19:59.611] (II) DAEMON: Authenticated successfully [09:19:59.612] (II) GREETER: Message received from daemon: LoginSucceeded [09:19:59.668] (II) HELPER: [PAM] Ended. [09:19:59.670] (II) DAEMON: Auth: sddm-helper exited successfully [09:19:59.670] (II) DAEMON: Greeter stopped. [09:19:59.725] (II) HELPER: Starting: "/usr/share/sddm/scripts/Xsession" "/usr/bin/startkde" [09:19:59.727] (II) HELPER: Adding cookie to "/home/gerhard/.Xauthority" [09:19:59.735] (II) DAEMON: Session started [09:28:22.176] (II) HELPER: [PAM] Ended. [09:28:22.178] (II) DAEMON: Auth: sddm-helper exited successfully [09:28:22.179] (II) DAEMON: Socket server stopping... [09:28:22.179] (II) DAEMON: Socket server stopped. [09:28:22.179] (II) DAEMON: Display server stopping... [09:28:22.414] (II) DAEMON: Display server stopped. [09:28:22.415] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [09:28:22.418] (II) DAEMON: Removing display 0 ... [09:28:22.418] (II) DAEMON: Adding new display 0 on vt 7 ... [09:28:22.419] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [09:28:22.424] (II) DAEMON: Display server starting... [09:28:22.425] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [09:28:22.803] (WW) DAEMON: Signal received: SIGUSR1 [09:28:22.803] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup" [09:28:22.804] (II) DAEMON: Display server started. [09:28:22.804] (II) DAEMON: Socket server starting... [09:28:22.805] (II) DAEMON: Socket server started. [09:28:22.805] (II) DAEMON: Greeter starting... [09:28:22.820] (II) HELPER: [PAM] Starting... [09:28:22.820] (II) HELPER: [PAM] Authenticating... [09:28:22.820] (II) HELPER: [PAM] returning. [09:28:22.852] (II) DAEMON: Greeter session started successfully [09:28:22.976] (II) GREETER: Connected to the daemon. [09:28:22.977] (II) DAEMON: Message received from greeter: Connect [09:28:23.030] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffec8401920), parent's thread is QThread(0x1f6ae30), current thread is QThread(0x1fbc190) [09:28:23.030] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffec8401920), parent's thread is QThread(0x1f6ae30), current thread is QThread(0x1fbc190) [09:28:23.031] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffec8401920), parent's thread is QThread(0x1f6ae30), current thread is QThread(0x1fbc190) [09:28:23.031] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [09:28:23.634] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffec8401920), parent's thread is QThread(0x1f6ae30), current thread is QThread(0x1fbc190) [09:28:23.634] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [09:28:24.283] (WW) GREETER: file:///usr/share/sddm/themes/breeze/components/InfoPane.qml:52:22: Unable to assign [undefined] to int [09:28:24.293] (II) GREETER: Message received from daemon: Capabilities [09:28:24.293] (II) GREETER: Message received from daemon: HostName [09:28:30.740] (II) DAEMON: Message received from greeter: Login [09:28:30.740] (II) DAEMON: Reading from "plasma.desktop" [09:28:30.758] (II) HELPER: [PAM] Starting... [09:28:30.758] (II) HELPER: [PAM] Authenticating... [09:28:30.758] (II) HELPER: [PAM] Preparing to converse... [09:28:30.758] (II) HELPER: [PAM] Conversation with 1 messages [09:28:31.365] (II) HELPER: [PAM] returning. [09:28:31.366] (II) DAEMON: Authenticated successfully [09:28:31.366] (II) GREETER: Message received from daemon: LoginSucceeded [09:28:31.411] (II) HELPER: [PAM] Ended. [09:28:31.413] (II) DAEMON: Auth: sddm-helper exited successfully [09:28:31.413] (II) DAEMON: Greeter stopped. [09:28:31.424] (II) HELPER: Starting: "/usr/share/sddm/scripts/Xsession" "/usr/bin/startkde" [09:28:31.426] (II) HELPER: Adding cookie to "/home/gerhard/.Xauthority" [09:28:31.433] (II) DAEMON: Session started [10:03:34.932] (WW) DAEMON: Signal received: SIGTERM [10:03:34.932] (II) DAEMON: Socket server stopping... [10:03:34.932] (II) DAEMON: Socket server stopped. [10:03:34.932] (II) DAEMON: Display server stopping... [10:03:35.275] (II) DAEMON: Display server stopped. [10:03:35.276] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [10:03:35.278] (WW) DAEMON: QProcess: Destroyed while process ("/usr/lib/x86_64-linux-gnu/sddm/sddm-helper") is still running. [10:04:03.988] (II) DAEMON: Initializing... [10:04:03.999] (II) DAEMON: Starting... [10:04:03.999] (II) DAEMON: Adding new display 0 on vt 7 ... [10:04:04.001] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [10:04:04.009] (II) DAEMON: Display server starting... [10:04:04.009] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [10:04:04.571] (WW) DAEMON: Signal received: SIGUSR1 [10:04:04.571] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup" [10:04:04.571] (II) DAEMON: Display server started. [10:04:04.572] (II) DAEMON: Socket server starting... [10:04:04.572] (II) DAEMON: Socket server started. [10:04:04.573] (II) DAEMON: Greeter starting... [10:04:04.597] (II) HELPER: [PAM] Starting... [10:04:04.597] (II) HELPER: [PAM] Authenticating... [10:04:04.597] (II) HELPER: [PAM] returning. [10:04:04.694] (II) DAEMON: Greeter session started successfully [10:04:04.906] (II) GREETER: Connected to the daemon. [10:04:04.907] (II) DAEMON: Message received from greeter: Connect [10:04:05.059] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffebf392340), parent's thread is QThread(0x1271e30), current thread is QThread(0x12dd160) [10:04:05.060] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffebf392340), parent's thread is QThread(0x1271e30), current thread is QThread(0x12dd160) [10:04:05.066] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffebf392340), parent's thread is QThread(0x1271e30), current thread is QThread(0x12dd160) [10:04:05.066] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [10:04:05.766] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffebf392340), parent's thread is QThread(0x1271e30), current thread is QThread(0x12dd160) [10:04:05.766] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [10:04:06.862] (WW) GREETER: file:///usr/share/sddm/themes/breeze/components/InfoPane.qml:52:22: Unable to assign [undefined] to int [10:04:06.882] (WW) GREETER: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18' [10:04:06.884] (II) GREETER: Message received from daemon: Capabilities [10:04:06.884] (II) GREETER: Message received from daemon: HostName [10:04:21.838] (II) DAEMON: Message received from greeter: Login [10:04:21.838] (II) DAEMON: Reading from "plasma.desktop" [10:04:21.855] (II) HELPER: [PAM] Starting... [10:04:21.856] (II) HELPER: [PAM] Authenticating... [10:04:21.856] (II) HELPER: [PAM] Preparing to converse... [10:04:21.856] (II) HELPER: [PAM] Conversation with 1 messages [10:04:22.468] (II) HELPER: [PAM] returning. [10:04:22.469] (II) DAEMON: Authenticated successfully [10:04:22.469] (II) GREETER: Message received from daemon: LoginSucceeded [10:04:22.526] (II) HELPER: [PAM] Ended. [10:04:22.527] (II) DAEMON: Auth: sddm-helper exited successfully [10:04:22.528] (II) DAEMON: Greeter stopped. [10:04:22.583] (II) HELPER: Starting: "/usr/share/sddm/scripts/Xsession" "/usr/bin/startkde" [10:04:22.585] (II) HELPER: Adding cookie to "/home/gerhard/.Xauthority" [10:04:22.594] (II) DAEMON: Session started [10:33:17.411] (WW) DAEMON: Authentication error: "Process crashed" [10:33:17.411] (WW) DAEMON: Auth: sddm-helper crashed (exit code 15) [10:33:17.411] (WW) DAEMON: Authentication error: "Process crashed" [10:33:17.411] (WW) DAEMON: Auth: sddm-helper exited with 15 [10:33:17.411] (II) DAEMON: Socket server stopping... [10:33:17.411] (II) DAEMON: Socket server stopped. [10:33:17.411] (II) DAEMON: Display server stopping... [10:33:17.676] (II) DAEMON: Display server stopped. [10:33:17.676] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [10:33:17.679] (II) DAEMON: Removing display 0 ... [10:33:17.679] (II) DAEMON: Adding new display 0 on vt 7 ... [10:33:17.680] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [10:33:17.684] (II) DAEMON: Display server starting... [10:33:17.684] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [10:33:17.686] (WW) DAEMON: Signal received: SIGTERM [10:33:17.686] (II) DAEMON: Display server stopping... [10:33:17.686] (II) DAEMON: Display server stopped. [10:33:17.686] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [10:33:44.977] (II) DAEMON: Initializing... [10:33:44.988] (II) DAEMON: Starting... [10:33:44.988] (II) DAEMON: Adding new display 0 on vt 7 ... [10:33:44.990] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [10:33:44.998] (II) DAEMON: Display server starting... [10:33:44.998] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [10:33:45.560] (WW) DAEMON: Signal received: SIGUSR1 [10:33:45.561] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup" [10:33:45.561] (II) DAEMON: Display server started. [10:33:45.561] (II) DAEMON: Socket server starting... [10:33:45.562] (II) DAEMON: Socket server started. [10:33:45.563] (II) DAEMON: Greeter starting... [10:33:45.587] (II) HELPER: [PAM] Starting... [10:33:45.587] (II) HELPER: [PAM] Authenticating... [10:33:45.587] (II) HELPER: [PAM] returning. [10:33:45.685] (II) DAEMON: Greeter session started successfully [10:33:45.896] (II) GREETER: Connected to the daemon. [10:33:45.896] (II) DAEMON: Message received from greeter: Connect [10:33:46.052] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd8841d840), parent's thread is QThread(0x14d4e30), current thread is QThread(0x16a7bb0) [10:33:46.053] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd8841d840), parent's thread is QThread(0x14d4e30), current thread is QThread(0x16a7bb0) [10:33:46.059] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd8841d840), parent's thread is QThread(0x14d4e30), current thread is QThread(0x16a7bb0) [10:33:46.060] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [10:33:46.755] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7ffd8841d840), parent's thread is QThread(0x14d4e30), current thread is QThread(0x16a7bb0) [10:33:46.755] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [10:33:47.852] (WW) GREETER: file:///usr/share/sddm/themes/breeze/components/InfoPane.qml:52:22: Unable to assign [undefined] to int [10:33:47.872] (WW) GREETER: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18' [10:33:47.874] (II) GREETER: Message received from daemon: Capabilities [10:33:47.875] (II) GREETER: Message received from daemon: HostName [10:34:32.244] (II) DAEMON: Message received from greeter: Login [10:34:32.244] (II) DAEMON: Reading from "plasma.desktop" [10:34:32.260] (II) HELPER: [PAM] Starting... [10:34:32.260] (II) HELPER: [PAM] Authenticating... [10:34:32.260] (II) HELPER: [PAM] Preparing to converse... [10:34:32.260] (II) HELPER: [PAM] Conversation with 1 messages [10:34:32.868] (II) HELPER: [PAM] returning. [10:34:32.869] (II) DAEMON: Authenticated successfully [10:34:32.869] (II) GREETER: Message received from daemon: LoginSucceeded [10:34:32.924] (II) HELPER: [PAM] Ended. [10:34:32.926] (II) DAEMON: Auth: sddm-helper exited successfully [10:34:32.926] (II) DAEMON: Greeter stopped. [10:34:32.977] (II) HELPER: Starting: "/usr/share/sddm/scripts/Xsession" "/usr/bin/startkde" [10:34:32.979] (II) HELPER: Adding cookie to "/home/gerhard/.Xauthority" [10:34:32.986] (II) DAEMON: Session started [10:50:53.245] (WW) DAEMON: Signal received: SIGTERM [10:50:53.245] (II) DAEMON: Socket server stopping... [10:50:53.245] (II) DAEMON: Socket server stopped. [10:50:53.245] (II) DAEMON: Display server stopping... [10:50:53.507] (II) DAEMON: Display server stopped. [10:50:53.507] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [10:50:53.511] (WW) DAEMON: QProcess: Destroyed while process ("/usr/lib/x86_64-linux-gnu/sddm/sddm-helper") is still running. [10:51:20.995] (II) DAEMON: Initializing... [10:51:21.007] (II) DAEMON: Starting... [10:51:21.007] (II) DAEMON: Adding new display 0 on vt 7 ... [10:51:21.009] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [10:51:21.019] (II) DAEMON: Display server starting... [10:51:21.020] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [10:51:21.589] (WW) DAEMON: Signal received: SIGUSR1 [10:51:21.589] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup" [10:51:21.590] (II) DAEMON: Display server started. [10:51:21.590] (II) DAEMON: Socket server starting... [10:51:21.590] (II) DAEMON: Socket server started. [10:51:21.592] (II) DAEMON: Greeter starting... [10:51:21.613] (II) HELPER: [PAM] Starting... [10:51:21.613] (II) HELPER: [PAM] Authenticating... [10:51:21.613] (II) HELPER: [PAM] returning. [10:51:21.702] (II) DAEMON: Greeter session started successfully [10:51:21.910] (II) GREETER: Connected to the daemon. [10:51:21.911] (II) DAEMON: Message received from greeter: Connect [10:51:22.059] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7fff8db41a90), parent's thread is QThread(0x17c8e30), current thread is QThread(0x181a9e0) [10:51:22.059] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7fff8db41a90), parent's thread is QThread(0x17c8e30), current thread is QThread(0x181a9e0) [10:51:22.065] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7fff8db41a90), parent's thread is QThread(0x17c8e30), current thread is QThread(0x181a9e0) [10:51:22.066] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [10:51:22.764] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7fff8db41a90), parent's thread is QThread(0x17c8e30), current thread is QThread(0x181a9e0) [10:51:22.764] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [10:51:23.871] (WW) GREETER: file:///usr/share/sddm/themes/breeze/components/InfoPane.qml:52:22: Unable to assign [undefined] to int [10:51:23.890] (WW) GREETER: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18' [10:51:23.892] (II) GREETER: Message received from daemon: Capabilities [10:51:23.892] (II) GREETER: Message received from daemon: HostName [10:51:29.282] (II) DAEMON: Message received from greeter: Login [10:51:29.282] (II) DAEMON: Reading from "plasma.desktop" [10:51:29.299] (II) HELPER: [PAM] Starting... [10:51:29.299] (II) HELPER: [PAM] Authenticating... [10:51:29.300] (II) HELPER: [PAM] Preparing to converse... [10:51:29.300] (II) HELPER: [PAM] Conversation with 1 messages [10:51:29.906] (II) HELPER: [PAM] returning. [10:51:29.906] (II) DAEMON: Authenticated successfully [10:51:29.907] (II) GREETER: Message received from daemon: LoginSucceeded [10:51:29.963] (II) HELPER: [PAM] Ended. [10:51:29.965] (II) DAEMON: Auth: sddm-helper exited successfully [10:51:29.965] (II) DAEMON: Greeter stopped. [10:51:30.026] (II) HELPER: Starting: "/usr/share/sddm/scripts/Xsession" "/usr/bin/startkde" [10:51:30.028] (II) HELPER: Adding cookie to "/home/gerhard/.Xauthority" [10:51:30.035] (II) DAEMON: Session started [18:33:08.884] (WW) DAEMON: Signal received: SIGTERM [18:33:08.884] (II) DAEMON: Socket server stopping... [18:33:08.884] (II) DAEMON: Socket server stopped. [18:33:08.884] (II) DAEMON: Display server stopping... [18:33:09.208] (II) DAEMON: Display server stopped. [18:33:09.208] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [18:33:09.211] (WW) DAEMON: QProcess: Destroyed while process ("/usr/lib/x86_64-linux-gnu/sddm/sddm-helper") is still running. [20:25:51.982] (II) DAEMON: Initializing... [20:25:51.993] (II) DAEMON: Starting... [20:25:51.993] (II) DAEMON: Adding new display 0 on vt 7 ... [20:25:51.995] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [20:25:52.004] (II) DAEMON: Display server starting... [20:25:52.004] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [20:25:52.596] (WW) DAEMON: Signal received: SIGUSR1 [20:25:52.596] (II) DAEMON: Running display setup script "/usr/share/sddm/scripts/Xsetup" [20:25:52.596] (II) DAEMON: Display server started. [20:25:52.597] (II) DAEMON: Socket server starting... [20:25:52.597] (II) DAEMON: Socket server started. [20:25:52.598] (II) DAEMON: Greeter starting... [20:25:52.626] (II) HELPER: [PAM] Starting... [20:25:52.626] (II) HELPER: [PAM] Authenticating... [20:25:52.626] (II) HELPER: [PAM] returning. [20:25:52.717] (II) DAEMON: Greeter session started successfully [20:25:52.933] (II) GREETER: Connected to the daemon. [20:25:52.933] (II) DAEMON: Message received from greeter: Connect [20:25:53.082] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7fff506b93d0), parent's thread is QThread(0x1fe6e30), current thread is QThread(0x20389e0) [20:25:53.082] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7fff506b93d0), parent's thread is QThread(0x1fe6e30), current thread is QThread(0x20389e0) [20:25:53.092] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7fff506b93d0), parent's thread is QThread(0x1fe6e30), current thread is QThread(0x20389e0) [20:25:53.092] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [20:25:53.819] (WW) GREETER: QObject: Cannot create children for a parent that is in a different thread. (Parent is SDDM::GreeterApp(0x7fff506b93d0), parent's thread is QThread(0x1fe6e30), current thread is QThread(0x20389e0) [20:25:53.819] (WW) GREETER: QObject::installEventFilter(): Cannot filter events for objects in a different thread. [20:25:54.939] (WW) GREETER: file:///usr/share/sddm/themes/breeze/components/InfoPane.qml:52:22: Unable to assign [undefined] to int [20:25:54.965] (WW) GREETER: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18' [20:25:54.967] (II) GREETER: Message received from daemon: Capabilities [20:25:54.967] (II) GREETER: Message received from daemon: HostName [20:26:44.938] (II) DAEMON: Message received from greeter: Login [20:26:44.938] (II) DAEMON: Reading from "plasma.desktop" [20:26:44.959] (II) HELPER: [PAM] Starting... [20:26:44.959] (II) HELPER: [PAM] Authenticating... [20:26:44.960] (II) HELPER: [PAM] Preparing to converse... [20:26:44.960] (II) HELPER: [PAM] Conversation with 1 messages [20:26:45.576] (II) HELPER: [PAM] returning. [20:26:45.577] (II) DAEMON: Authenticated successfully [20:26:45.577] (II) GREETER: Message received from daemon: LoginSucceeded [20:26:45.639] (II) HELPER: [PAM] Ended. [20:26:45.641] (II) DAEMON: Auth: sddm-helper exited successfully [20:26:45.642] (II) DAEMON: Greeter stopped. [20:26:45.691] (II) HELPER: Starting: "/usr/share/sddm/scripts/Xsession" "/usr/bin/startkde" [20:26:45.694] (II) HELPER: Adding cookie to "/home/gerhard/.Xauthority" [20:26:45.702] (II) DAEMON: Session started [20:40:31.501] (WW) DAEMON: Authentication error: "Process crashed" [20:40:31.501] (WW) DAEMON: Auth: sddm-helper crashed (exit code 15) [20:40:31.501] (WW) DAEMON: Authentication error: "Process crashed" [20:40:31.501] (WW) DAEMON: Auth: sddm-helper exited with 15 [20:40:31.501] (II) DAEMON: Socket server stopping... [20:40:31.501] (II) DAEMON: Socket server stopped. [20:40:31.501] (II) DAEMON: Display server stopping... [20:40:31.793] (II) DAEMON: Display server stopped. [20:40:31.793] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop" [20:40:31.800] (II) DAEMON: Removing display 0 ... [20:40:31.800] (II) DAEMON: Adding new display 0 on vt 7 ... [20:40:31.800] (II) DAEMON: Adding cookie to "/var/run/sddm/:0" [20:40:31.805] (II) DAEMON: Display server starting... [20:40:31.805] (II) DAEMON: Running: /usr/bin/X :0 -auth /var/run/sddm/:0 -nolisten tcp -background none -noreset vt7 [20:40:31.807] (WW) DAEMON: Signal received: SIGTERM [20:40:31.807] (II) DAEMON: Display server stopping... [20:40:31.808] (II) DAEMON: Display server stopped. [20:40:31.808] (II) DAEMON: Running display stop script "/usr/share/sddm/scripts/Xstop"

12

Please use a code box or pastebin next time. Posting long strings of text like this can cause your account to be automatically flagged and/or suspended.

13

log from Xstop:

ps: i have a AMD Card!

[code]#!/bin/sh

Xstop - run as root after stopping X

if [ -e /sbin/prime-switch ]; then
echo running NVIDIA Prime switch /sbin/prime-switch
/sbin/prime-switch
fi[/code]

14

Thank you, much better. :wink:

15

I see your system is using prime-switch to switch between the Intel chip and the NVIDIA chip.
This means that your running your hybrid system using nvidia-prime instead of bumblebee, would this be correct?

16

I do not have Nvidia or Intel!

I have a pure AMD system! (AMD APU A8 1.6GHz Quad Core - AMD RadeonTM HD7600G)

17

Hmm, OK. That’s seems a bit strange then.
Anyway, what chip set do you have, and what drivers are you using?
(radeon, the new amdgpu driver, or catalyst)

18

here Xorg-log

[code][ 63.795]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 63.795] X Protocol Version 11, Revision 0
[ 63.795] Build Operating System: Linux 3.13.0-68-generic x86_64 Ubuntu
[ 63.795] Current Operating System: Linux gerhard-desktop 4.5.0-040500-generic #201603140130 SMP Mon Mar 14 05:32:22 UTC 2016 x86_64
[ 63.795] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-040500-generic root=UUID=d7516120-12c6-4264-8688-92f61b6c005c ro noprompt quiet splash vt.handoff=7
[ 63.796] Build Date: 12 November 2015 05:33:29PM
[ 63.796] xorg-server 2:1.17.2-1ubuntu9.1 (For technical support please see http://www.ubuntu.com/support)
[ 63.796] Current version of pixman: 0.32.6
[ 63.796] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 63.796] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 63.796] (==) Log file: “/var/log/Xorg.0.log”, Time: Sun Mar 20 20:41:48 2016
[ 63.797] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 63.797] (==) No Layout section. Using the first Screen section.
[ 63.797] (==) No screen section available. Using defaults.
[ 63.797] () |–>Screen “Default Screen Section” (0)
[ 63.797] (**) | |–>Monitor “”
[ 63.797] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
[ 63.797] (==) Automatically adding devices
[ 63.797] (==) Automatically enabling devices
[ 63.797] (==) Automatically adding GPU devices
[ 63.798] (WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
[ 63.798] Entry deleted from font path.
[ 63.798] (WW) The directory “/usr/share/fonts/X11/75dpi/” does not exist.
[ 63.798] Entry deleted from font path.
[ 63.798] (WW) The directory “/usr/share/fonts/X11/75dpi” does not exist.
[ 63.798] Entry deleted from font path.
[ 63.798] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 63.798] (==) ModulePath set to “/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules”
[ 63.798] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 63.798] (II) Loader magic: 0x558bc4289d40
[ 63.798] (II) Module ABI versions:
[ 63.798] X.Org ANSI C Emulation: 0.4
[ 63.798] X.Org Video Driver: 19.0
[ 63.798] X.Org XInput driver : 21.0
[ 63.798] X.Org Server Extension : 9.0
[ 63.799] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 63.801] (–) PCI:*(0:0:1:0) 1002:9908:1002:9908 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 63.801] (II) LoadModule: “glx”
[ 63.802] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 63.803] (II) Module glx: vendor=“X.Org Foundation”
[ 63.803] compiled for 1.17.2, module version = 1.0.0
[ 63.803] ABI class: X.Org Server Extension, version 9.0
[ 63.803] (==) AIGLX enabled
[ 63.803] (==) Matched fglrx as autoconfigured driver 0
[ 63.803] (==) Matched ati as autoconfigured driver 1
[ 63.803] (==) Matched fglrx as autoconfigured driver 2
[ 63.803] (==) Matched ati as autoconfigured driver 3
[ 63.803] (==) Matched modesetting as autoconfigured driver 4
[ 63.803] (==) Matched fbdev as autoconfigured driver 5
[ 63.803] (==) Matched vesa as autoconfigured driver 6
[ 63.803] (==) Assigned the driver to the xf86ConfigLayout
[ 63.803] (II) LoadModule: “fglrx”
[ 63.804] (WW) Warning, couldn’t open module fglrx
[ 63.804] (II) UnloadModule: “fglrx”
[ 63.804] (II) Unloading fglrx
[ 63.804] (EE) Failed to load module “fglrx” (module does not exist, 0)
[ 63.804] (II) LoadModule: “ati”
[ 63.804] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 63.804] (II) Module ati: vendor=“X.Org Foundation”
[ 63.804] compiled for 1.17.2, module version = 7.6.99
[ 63.804] Module class: X.Org Video Driver
[ 63.804] ABI class: X.Org Video Driver, version 19.0
[ 63.804] (II) LoadModule: “radeon”
[ 63.805] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 63.805] (II) Module radeon: vendor=“X.Org Foundation”
[ 63.805] compiled for 1.17.2, module version = 7.6.99
[ 63.805] Module class: X.Org Video Driver
[ 63.805] ABI class: X.Org Video Driver, version 19.0
[ 63.805] (II) LoadModule: “modesetting”
[ 63.805] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 63.805] (II) Module modesetting: vendor=“X.Org Foundation”
[ 63.805] compiled for 1.17.2, module version = 1.17.2
[ 63.806] Module class: X.Org Video Driver
[ 63.806] ABI class: X.Org Video Driver, version 19.0
[ 63.806] (II) LoadModule: “fbdev”
[ 63.806] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 63.806] (II) Module fbdev: vendor=“X.Org Foundation”
[ 63.806] compiled for 1.17.1, module version = 0.4.4
[ 63.806] Module class: X.Org Video Driver
[ 63.806] ABI class: X.Org Video Driver, version 19.0
[ 63.806] (II) LoadModule: “vesa”
[ 63.806] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 63.806] (II) Module vesa: vendor=“X.Org Foundation”
[ 63.806] compiled for 1.17.1, module version = 2.3.4
[ 63.806] Module class: X.Org Video Driver
[ 63.806] ABI class: X.Org Video Driver, version 19.0
[ 63.806] (==) Matched fglrx as autoconfigured driver 0
[ 63.806] (==) Matched ati as autoconfigured driver 1
[ 63.806] (==) Matched fglrx as autoconfigured driver 2
[ 63.806] (==) Matched ati as autoconfigured driver 3
[ 63.806] (==) Matched modesetting as autoconfigured driver 4
[ 63.806] (==) Matched fbdev as autoconfigured driver 5
[ 63.806] (==) Matched vesa as autoconfigured driver 6
[ 63.806] (==) Assigned the driver to the xf86ConfigLayout
[ 63.806] (II) LoadModule: “fglrx”
[ 63.807] (WW) Warning, couldn’t open module fglrx
[ 63.807] (II) UnloadModule: “fglrx”
[ 63.807] (II) Unloading fglrx
[ 63.807] (EE) Failed to load module “fglrx” (module does not exist, 0)
[ 63.807] (II) LoadModule: “ati”
[ 63.807] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 63.807] (II) Module ati: vendor=“X.Org Foundation”
[ 63.807] compiled for 1.17.2, module version = 7.6.99
[ 63.807] Module class: X.Org Video Driver
[ 63.807] ABI class: X.Org Video Driver, version 19.0
[ 63.807] (II) LoadModule: “modesetting”
[ 63.808] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 63.808] (II) Module modesetting: vendor=“X.Org Foundation”
[ 63.808] compiled for 1.17.2, module version = 1.17.2
[ 63.808] Module class: X.Org Video Driver
[ 63.808] ABI class: X.Org Video Driver, version 19.0
[ 63.808] (II) UnloadModule: “modesetting”
[ 63.808] (II) Unloading modesetting
[ 63.808] (II) Failed to load module “modesetting” (already loaded, 0)
[ 63.808] (II) LoadModule: “fbdev”
[ 63.808] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 63.808] (II) Module fbdev: vendor=“X.Org Foundation”
[ 63.808] compiled for 1.17.1, module version = 0.4.4
[ 63.808] Module class: X.Org Video Driver
[ 63.808] ABI class: X.Org Video Driver, version 19.0
[ 63.808] (II) UnloadModule: “fbdev”
[ 63.808] (II) Unloading fbdev
[ 63.808] (II) Failed to load module “fbdev” (already loaded, 0)
[ 63.808] (II) LoadModule: “vesa”
[ 63.808] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 63.808] (II) Module vesa: vendor=“X.Org Foundation”
[ 63.808] compiled for 1.17.1, module version = 2.3.4
[ 63.808] Module class: X.Org Video Driver
[ 63.808] ABI class: X.Org Video Driver, version 19.0
[ 63.808] (II) UnloadModule: “vesa”
[ 63.808] (II) Unloading vesa
[ 63.809] (II) Failed to load module “vesa” (already loaded, 0)
[ 63.809] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 63.819] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 63.819] (II) FBDEV: driver for framebuffer: fbdev
[ 63.819] (II) VESA: driver for VESA chipsets: vesa
[ 63.819] (++) using VT number 1

[ 63.819] (–) controlling tty is VT number 1, auto-enabling KeepTty
[ 63.819] (II) [KMS] Kernel modesetting enabled.
[ 63.819] (WW) Falling back to old probe method for modesetting
[ 63.820] (WW) Falling back to old probe method for fbdev
[ 63.820] (II) Loading sub module “fbdevhw”
[ 63.820] (II) LoadModule: “fbdevhw”
[ 63.820] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 63.820] (II) Module fbdevhw: vendor=“X.Org Foundation”
[ 63.820] compiled for 1.17.2, module version = 0.0.2
[ 63.820] ABI class: X.Org Video Driver, version 19.0
[ 63.820] (WW) Falling back to old probe method for vesa
[ 63.820] (II) RADEON(0): Creating default Display subsection in Screen section
“Default Screen Section” for depth/fbbpp 24/32
[ 63.820] (==) RADEON(0): Depth 24, (–) framebuffer bpp 32
[ 63.820] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 63.820] (==) RADEON(0): Default visual is TrueColor
[ 63.820] (==) RADEON(0): RGB weight 888
[ 63.820] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 63.820] (–) RADEON(0): Chipset: “ARUBA” (ChipID = 0x9908)
[ 63.821] (II) Loading sub module “fb”
[ 63.821] (II) LoadModule: “fb”
[ 63.821] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 63.822] (II) Module fb: vendor=“X.Org Foundation”
[ 63.822] compiled for 1.17.2, module version = 1.0.0
[ 63.822] ABI class: X.Org ANSI C Emulation, version 0.4
[ 63.822] (II) Loading sub module “dri2”
[ 63.822] (II) LoadModule: “dri2”
[ 63.822] (II) Module “dri2” already built-in
[ 63.822] (II) Loading sub module “exa”
[ 63.822] (II) LoadModule: “exa”
[ 63.822] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 63.823] (II) Module exa: vendor=“X.Org Foundation”
[ 63.823] compiled for 1.17.2, module version = 2.6.0
[ 63.823] ABI class: X.Org Video Driver, version 19.0
[ 63.823] (II) RADEON(0): KMS Color Tiling: enabled
[ 63.823] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 63.823] (II) RADEON(0): KMS Pageflipping: enabled
[ 63.823] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 63.828] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 63.890] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 63.896] (II) RADEON(0): EDID for output DisplayPort-0
[ 63.956] (II) RADEON(0): EDID for output HDMI-0
[ 63.956] (II) RADEON(0): Manufacturer: SAM Model: 771 Serial#: 1110590279
[ 63.957] (II) RADEON(0): Year: 2010 Week: 44
[ 63.957] (II) RADEON(0): EDID Version: 1.3
[ 63.957] (II) RADEON(0): Digital Display Input
[ 63.957] (II) RADEON(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 63.957] (II) RADEON(0): Gamma: 2.20
[ 63.957] (II) RADEON(0): DPMS capabilities: Off
[ 63.957] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 63.957] (II) RADEON(0): First detailed timing is preferred mode
[ 63.957] (II) RADEON(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
[ 63.957] (II) RADEON(0): blueX: 0.146 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
[ 63.957] (II) RADEON(0): Supported established timings:
[ 63.957] (II) RADEON(0): 720x400@70Hz
[ 63.957] (II) RADEON(0): 640x480@60Hz
[ 63.957] (II) RADEON(0): 640x480@67Hz
[ 63.957] (II) RADEON(0): 640x480@72Hz
[ 63.957] (II) RADEON(0): 640x480@75Hz
[ 63.957] (II) RADEON(0): 800x600@56Hz
[ 63.957] (II) RADEON(0): 800x600@60Hz
[ 63.957] (II) RADEON(0): 800x600@72Hz
[ 63.957] (II) RADEON(0): 800x600@75Hz
[ 63.957] (II) RADEON(0): 832x624@75Hz
[ 63.957] (II) RADEON(0): 1024x768@60Hz
[ 63.957] (II) RADEON(0): 1024x768@70Hz
[ 63.957] (II) RADEON(0): 1024x768@75Hz
[ 63.957] (II) RADEON(0): 1280x1024@75Hz
[ 63.957] (II) RADEON(0): 1152x864@75Hz
[ 63.957] (II) RADEON(0): Manufacturer’s mask: 0
[ 63.957] (II) RADEON(0): Supported standard timings:
[ 63.957] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 63.957] (II) RADEON(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 63.957] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 63.957] (II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 63.957] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 63.957] (II) RADEON(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 63.957] (II) RADEON(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 63.957] (II) RADEON(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 63.957] (II) RADEON(0): Supported detailed timing:
[ 63.957] (II) RADEON(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 63.957] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 63.957] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 63.957] (II) RADEON(0): Supported detailed timing:
[ 63.957] (II) RADEON(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 63.957] (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 63.957] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 63.957] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 63.957] (II) RADEON(0): Monitor name: SMBX2431
[ 63.957] (II) RADEON(0): Supported detailed timing:
[ 63.957] (II) RADEON(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 63.957] (II) RADEON(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 63.957] (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 63.957] (II) RADEON(0): Supported detailed timing:
[ 63.957] (II) RADEON(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 63.957] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 63.957] (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 63.957] (II) RADEON(0): Supported detailed timing:
[ 63.957] (II) RADEON(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 63.957] (II) RADEON(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 63.957] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 63.957] (II) RADEON(0): Supported detailed timing:
[ 63.957] (II) RADEON(0): clock: 27.0 MHz Image Size: 531 x 299 mm
[ 63.957] (II) RADEON(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 63.957] (II) RADEON(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 63.957] (II) RADEON(0): Supported detailed timing:
[ 63.957] (II) RADEON(0): clock: 27.0 MHz Image Size: 531 x 299 mm
[ 63.957] (II) RADEON(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 63.958] (II) RADEON(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 63.958] (II) RADEON(0): Number of EDID sections to follow: 1
[ 63.958] (II) RADEON(0): EDID (in hex):
[ 63.958] (II) RADEON(0): 00ffffffffffff004c2d710747433242
[ 63.958] (II) RADEON(0): 2c14010380351e782a6041a6564a9c25
[ 63.958] (II) RADEON(0): 125054bfef80714f8100814081809500
[ 63.958] (II) RADEON(0): 950fa940b300023a801871382d40582c
[ 63.958] (II) RADEON(0): 4500132b2100001e011d007251d01e20
[ 63.958] (II) RADEON(0): 6e285500132b2100001e000000fd0038
[ 63.958] (II) RADEON(0): 4b1e5111000a202020202020000000fc
[ 63.958] (II) RADEON(0): 00534d4258323433310a20202020011e
[ 63.958] (II) RADEON(0): 02031cf14890041f0514131203230907
[ 63.958] (II) RADEON(0): 078301000066030c00200080011d80d0
[ 63.958] (II) RADEON(0): 721c1620102c2580132b2100009e011d
[ 63.958] (II) RADEON(0): 8018711c1620582c2500132b2100009e
[ 63.958] (II) RADEON(0): 011d00bc52d01e20b8285540132b2100
[ 63.958] (II) RADEON(0): 001e8c0ad090204031200c405500132b
[ 63.958] (II) RADEON(0): 210000188c0ad08a20e02d10103e9600
[ 63.958] (II) RADEON(0): 132b210000180000000000000000003d
[ 63.958] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 63.958] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 63.958] (II) RADEON(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 63.958] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 63.958] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 63.958] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 63.958] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 63.958] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 63.958] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 63.958] (II) RADEON(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 63.958] (II) RADEON(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 63.958] (II) RADEON(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 63.958] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 63.958] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 63.958] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 63.958] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 63.958] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 63.958] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 63.958] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 63.959] (II) RADEON(0): Output HDMI-0 connected
[ 63.959] (II) RADEON(0): Using exact sizes for initial modes
[ 63.959] (II) RADEON(0): Output HDMI-0 using initial mode 1920x1080
[ 63.959] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 63.959] (II) RADEON(0): mem size init: gart size :3fdcc000 vram size: s:20000000 visible:1f32b000
[ 63.959] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 63.959] (==) RADEON(0): DPI set to (96, 96)
[ 63.959] (II) Loading sub module “ramdac”
[ 63.959] (II) LoadModule: “ramdac”
[ 63.959] (II) Module “ramdac” already built-in
[ 63.959] (II) UnloadModule: “modesetting”
[ 63.959] (II) Unloading modesetting
[ 63.959] (II) UnloadModule: “fbdev”
[ 63.959] (II) Unloading fbdev
[ 63.959] (II) UnloadSubModule: “fbdevhw”
[ 63.959] (II) Unloading fbdevhw
[ 63.959] (II) UnloadModule: “vesa”
[ 63.959] (II) Unloading vesa
[ 63.959] (–) Depth 24 pixmap format is 32 bpp
[ 63.960] (II) RADEON(0): [DRI2] Setup complete
[ 63.960] (II) RADEON(0): [DRI2] DRI driver: r600
[ 63.960] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 63.960] (II) RADEON(0): Front buffer size: 8160K
[ 63.960] (II) RADEON(0): VRAM usage limit set to 452631K
[ 63.961] (==) RADEON(0): DRI3 disabled
[ 63.961] (==) RADEON(0): Backing store enabled
[ 63.961] (II) RADEON(0): Direct rendering enabled
[ 63.961] (II) EXA(0): Driver allocated offscreen pixmaps
[ 63.961] (II) EXA(0): Driver registered support for the following operations:
[ 63.961] (II) Solid
[ 63.961] (II) Copy
[ 63.961] (II) Composite (RENDER acceleration)
[ 63.961] (II) UploadToScreen
[ 63.961] (II) DownloadFromScreen
[ 63.961] (II) RADEON(0): Acceleration enabled
[ 63.961] (==) RADEON(0): DPMS enabled
[ 63.961] (==) RADEON(0): Silken mouse enabled
[ 63.962] (II) RADEON(0): Set up textured video
[ 63.962] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 63.962] (II) RADEON(0): [XvMC] Extension initialized.
[ 63.962] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 64.002] (–) RandR disabled
[ 64.012] (II) SELinux: Disabled on system
[ 64.157] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 64.157] (II) AIGLX: enabled GLX_ARB_create_context
[ 64.157] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 64.157] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 64.157] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 64.157] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 64.157] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 64.157] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 64.157] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 64.157] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 64.159] (II) AIGLX: Loaded and initialized r600
[ 64.159] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 64.160] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 64.187] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 64.254] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 64.254] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 64.254] (II) LoadModule: “evdev”
[ 64.255] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 64.257] (II) Module evdev: vendor=“X.Org Foundation”
[ 64.257] compiled for 1.17.1, module version = 2.9.2
[ 64.257] Module class: X.Org XInput Driver
[ 64.257] ABI class: X.Org XInput driver, version 21.0
[ 64.257] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 64.257] () Power Button: always reports core events
[ 64.257] () evdev: Power Button: Device: “/dev/input/event1”
[ 64.257] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 64.257] (–) evdev: Power Button: Found keys
[ 64.257] (II) evdev: Power Button: Configuring as keyboard
[ 64.257] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1”
[ 64.257] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
[ 64.257] () Option “xkb_rules” “evdev”
[ 64.257] () Option “xkb_model” “pc105”
[ 64.257] () Option “xkb_layout” “de”
[ 64.263] (II) XKB: generating xkmfile /tmp/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[ 64.300] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 64.300] () Video Bus: Applying InputClass “evdev keyboard catchall”
[ 64.300] (II) Using input driver ‘evdev’ for ‘Video Bus’
[ 64.300] () Video Bus: always reports core events
[ 64.300] () evdev: Video Bus: Device: “/dev/input/event2”
[ 64.300] (–) evdev: Video Bus: Vendor 0 Product 0x6
[ 64.300] (–) evdev: Video Bus: Found keys
[ 64.300] (II) evdev: Video Bus: Configuring as keyboard
[ 64.300] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4/event2”
[ 64.300] (II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD, id 7)
[ 64.300] () Option “xkb_rules” “evdev”
[ 64.300] () Option “xkb_model” “pc105”
[ 64.300] () Option “xkb_layout” “de”
[ 64.301] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 64.301] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 64.301] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 64.301] () Power Button: always reports core events
[ 64.301] () evdev: Power Button: Device: “/dev/input/event0”
[ 64.302] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 64.302] (–) evdev: Power Button: Found keys
[ 64.302] (II) evdev: Power Button: Configuring as keyboard
[ 64.302] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0”
[ 64.302] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 8)
[ 64.302] () Option “xkb_rules” “evdev”
[ 64.302] () Option “xkb_model” “pc105”
[ 64.302] () Option “xkb_layout” “de”
[ 64.303] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[ 64.303] (II) No input driver specified, ignoring this device.
[ 64.303] (II) This device may have been added with another device file.
[ 64.304] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event8)
[ 64.304] (II) No input driver specified, ignoring this device.
[ 64.304] (II) This device may have been added with another device file.
[ 64.304] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event9)
[ 64.305] (II) No input driver specified, ignoring this device.
[ 64.305] (II) This device may have been added with another device file.
[ 64.305] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event10)
[ 64.305] (II) No input driver specified, ignoring this device.
[ 64.305] (II) This device may have been added with another device file.
[ 64.306] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 64.306] () Microsoft Wired Keyboard 600: Applying InputClass “evdev keyboard catchall”
[ 64.306] (II) Using input driver ‘evdev’ for ‘Microsoft Wired Keyboard 600’
[ 64.306] () Microsoft Wired Keyboard 600: always reports core events
[ 64.306] () evdev: Microsoft Wired Keyboard 600: Device: “/dev/input/event3”
[ 64.306] (–) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 64.306] (–) evdev: Microsoft Wired Keyboard 600: Found keys
[ 64.306] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 64.306] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/0003:045E:0750.0001/input/input7/event3”
[ 64.306] (II) XINPUT: Adding extended input device “Microsoft Wired Keyboard 600” (type: KEYBOARD, id 9)
[ 64.306] () Option “xkb_rules” “evdev”
[ 64.306] () Option “xkb_model” “pc105”
[ 64.306] () Option “xkb_layout” “de”
[ 64.308] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 64.308] () Microsoft Wired Keyboard 600: Applying InputClass “evdev keyboard catchall”
[ 64.308] (II) Using input driver ‘evdev’ for ‘Microsoft Wired Keyboard 600’
[ 64.308] () Microsoft Wired Keyboard 600: always reports core events
[ 64.308] () evdev: Microsoft Wired Keyboard 600: Device: “/dev/input/event4”
[ 64.308] (–) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 64.308] (–) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 64.308] (–) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 64.308] (–) evdev: Microsoft Wired Keyboard 600: Found relative axes
[ 64.308] (–) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[ 64.308] (–) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
[ 64.308] (–) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 64.308] (–) evdev: Microsoft Wired Keyboard 600: Found keys
[ 64.308] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[ 64.308] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[ 64.308] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 64.308] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 64.308] () evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 64.308] () evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 64.309] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.1/0003:045E:0750.0002/input/input8/event4”
[ 64.309] (II) XINPUT: Adding extended input device “Microsoft Wired Keyboard 600” (type: KEYBOARD, id 10)
[ 64.309] () Option “xkb_rules” “evdev”
[ 64.309] () Option “xkb_model” “pc105”
[ 64.309] () Option “xkb_layout” “de”
[ 64.309] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[ 64.309] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[ 64.309] () Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 64.309] () Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 64.309] () Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 64.309] () Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 64.310] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 64.310] (II) No input driver specified, ignoring this device.
[ 64.310] (II) This device may have been added with another device file.
[ 64.311] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event5)
[ 64.311] () SIGMACHIP Usb Mouse: Applying InputClass “evdev pointer catchall”
[ 64.311] (II) Using input driver ‘evdev’ for ‘SIGMACHIP Usb Mouse’
[ 64.311] () SIGMACHIP Usb Mouse: always reports core events
[ 64.311] () evdev: SIGMACHIP Usb Mouse: Device: “/dev/input/event5”
[ 64.364] (–) evdev: SIGMACHIP Usb Mouse: Vendor 0x1c4f Product 0x69
[ 64.364] (–) evdev: SIGMACHIP Usb Mouse: Found 9 mouse buttons
[ 64.364] (–) evdev: SIGMACHIP Usb Mouse: Found scroll wheel(s)
[ 64.364] (–) evdev: SIGMACHIP Usb Mouse: Found relative axes
[ 64.364] (–) evdev: SIGMACHIP Usb Mouse: Found x and y relative axes
[ 64.364] (II) evdev: SIGMACHIP Usb Mouse: Configuring as mouse
[ 64.364] (II) evdev: SIGMACHIP Usb Mouse: Adding scrollwheel support
[ 64.364] () evdev: SIGMACHIP Usb Mouse: YAxisMapping: buttons 4 and 5
[ 64.364] () evdev: SIGMACHIP Usb Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 64.364] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/0003:1C4F:0069.0003/input/input9/event5”
[ 64.364] (II) XINPUT: Adding extended input device “SIGMACHIP Usb Mouse” (type: MOUSE, id 11)
[ 64.364] (II) evdev: SIGMACHIP Usb Mouse: initialized for relative axes.
[ 64.365] () SIGMACHIP Usb Mouse: (accel) keeping acceleration scheme 1
[ 64.365] () SIGMACHIP Usb Mouse: (accel) acceleration profile 0
[ 64.365] () SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000
[ 64.365] () SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4
[ 64.366] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse0)
[ 64.366] (II) No input driver specified, ignoring this device.
[ 64.366] (II) This device may have been added with another device file.
[ 64.367] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event6)
[ 64.367] () SIGMACHIP Usb Mouse: Applying InputClass “evdev keyboard catchall”
[ 64.367] (II) Using input driver ‘evdev’ for ‘SIGMACHIP Usb Mouse’
[ 64.367] () SIGMACHIP Usb Mouse: always reports core events
[ 64.367] () evdev: SIGMACHIP Usb Mouse: Device: “/dev/input/event6”
[ 64.367] (–) evdev: SIGMACHIP Usb Mouse: Vendor 0x1c4f Product 0x69
[ 64.367] (–) evdev: SIGMACHIP Usb Mouse: Found keys
[ 64.367] (II) evdev: SIGMACHIP Usb Mouse: Configuring as keyboard
[ 64.367] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.1/0003:1C4F:0069.0004/input/input10/event6”
[ 64.367] (II) XINPUT: Adding extended input device “SIGMACHIP Usb Mouse” (type: KEYBOARD, id 12)
[ 64.367] () Option “xkb_rules” “evdev”
[ 64.367] () Option “xkb_model” “pc105”
[ 64.367] () Option “xkb_layout” “de”
[ 68.233] (II) XKB: generating xkmfile /tmp/server-1BCDDEFD4E35562D3483623A3498B96EFC960598.xkm
[ 68.473] (II) RADEON(0): EDID vendor “SAM”, prod id 1905
[ 68.473] (II) RADEON(0): Using EDID range info for horizontal sync
[ 68.473] (II) RADEON(0): Using EDID range info for vertical refresh
[ 68.473] (II) RADEON(0): Printing DDC gathered Modelines:
[ 68.473] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 68.473] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 68.473] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 68.473] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 68.473] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 68.473] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 68.473] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 68.473] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 68.473] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 68.474] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 68.474] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 68.474] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 68.474] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 68.474] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 68.474] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 68.474] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 68.474] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 68.474] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 68.650] (II) RADEON(0): EDID vendor “SAM”, prod id 1905
[ 68.650] (II) RADEON(0): Using hsync ranges from config file
[ 68.650] (II) RADEON(0): Using vrefresh ranges from config file
[ 68.650] (II) RADEON(0): Printing DDC gathered Modelines:
[ 68.650] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 68.650] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 68.651] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 68.651] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 68.651] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 68.651] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 68.651] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 68.651] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 68.651] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 68.651] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 68.651] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 68.651] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 68.651] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 68.651] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 68.651] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[/code]

19

i have the Free Mesa Driver 11.3 (LLVM 3.8)

20

I wasn’t asking about mesa, but that is useful since I can rule out catalyst.
Are you using the radeon driver, or the new amdgpu driver?